（恢復檔案工具）UFS Explorer Professional Recovery 5.11

UFS Explorer專業恢復，您可以從崩潰或拆卸的RAID陣列恢復檔案。
您的RAID控制器，壞了或有故障，在這情況下，一些條紋RAID磁碟壞了，扇區或NAS韌體失敗，通常RAID變得拆卸，在RAID的磁碟恢復資料，尤其是條紋RAID的情況下（RAID 0，RAID 5或RAID6）。
如果RAID無法識別，你可以建立一個虛擬的RAID元件，並從從一個真正的喜歡的那裡恢復資料。
 UFS Explorer的專業恢復容許在虛擬RAID陣列重構和資料恢復。

With UFS Explorer Professional Recovery you may recover files from crashed or disassembled RAID arrays. In case your RAID controller was gone bad or got failure, some disk in Striped RAID got bad sector or NAS firmware failed, usually RAID becomes disassembled and it's hard to recover data from disks that were in RAID, especially in case of striped RAID (RAID 0, RAID 5 or RAID 6). If RAID could not be recognized, you can create a virtual RAID from its components and recover data from there like from a real one. UFS Explorer, Professional Recovery allows on-the-fly virtual RAID array reconstruction and data recovery from there.

UFS Explorer Professional Recovery allows data recovery from most existing RAID solutions, including mass NAS storages and even very specific RAID solutions. It embeds support of most RAID levels: JBOD, RAID 0,RAID 1,RAID 0+1,RAID 10, RAID 4, RAID 5, RAID 6, RAID 7 and their variations, full customization of RAID settings for striping, parity distribution and parity delays. This makes UFS Explorer Professional Recovery one of leading products for RAID recovery.

Features:
– Local hard disks read-only access
– RAW disk image files and virtual disks support
– UFS Explorer compressed disk images support
– Individual file copying
– File groups and file folders copying
– Deleted files recovery
– Multiple file system access
– Disk scan for lost file system
– Backup superblock use instead of damaged
– Advanced Data recovery
– Advanced recovery backup
– RAW recovery customization
– Data recovery from broken RAID arrays
– Back up disks or/and individual partitions
– Multiple languages supported in GUI

（恢復檔案工具）UFS Explorer Professional Recovery 5.11 | Home Page: www.ufsexplorer.com