Latest News

Home » 軟體評鑑 » (監察無線WiFi軟體工具)WirelessMon 4.0.0 Build 1008

(監察無線WiFi軟體工具)WirelessMon 4.0.0 Build 1008

【文章內容】:

PASSMARK WirelessMon是一個軟體工具,它容許使用者,
,以監察無線WiFi配接器的狀態,並收集關於附近的的無線接入點和在現實的時間中的火熱的斑點訊息。
 WirelessMon可以登入它收集的訊息到一個檔案中,同時還提供的信號水平和實質的時間的IP和802.11的WiFi的統計資料的全面繪圖。

下面的的無線的LAN訊息,可以提供由WirelessMon(在可用時,作為所有的無線的配接器將支援所有的的這些功能的):
在·電流時的連線訊息:SSID;連線接入點的MAC公司位址;的信號強度; Tx功率; Auth Type(驗證類型); RTS臨界值; FRAG臨界值;通道;頻率的關係;天線數;信標週期; ATIM視窗; Dwell Time(停留時間); HOP圖樣; HOP套服。
·的Staistics訊息:傳輸分段計數;組播傳輸的幀計數; Failed(故障)計數;重試計數;多重的重試計數; RTS的完成計數; RTS失效計數; ACK失效計數;幀重複計數;收稿片段計數;組播的模式收稿幀計數;寄件備份OK(確定) ; RCV OK(確定)的;
「已傳送」錯誤; RCV錯誤;可直接傳送的位元組數;導演的幀寄件備份,組播的傳送的位元組數;寄件備份的的多播幀數;的廣播節目的傳送的位元組數;的廣播節目的傳送的幀;導演的位元組數RCV;定向幀數:RCV;組播位址傳送協定位元組數RCV;多播幀數RCV;廣播節目的位元組RCV;廣播節目的框架所有類RCV。
·IP訊息:配接器的MAC位址; Adapter Name(配接器名稱);配接器IP位址;子網路遮罩; DHCP已啟用;閘道器位址;的DHCP Server中;獲得租約的時間;租賃過期;的DNS Server中。
·IP的計數器訊息:頻寬度;寄件備份的率(位元組/秒);資料速率(包/秒); RCV率(的封包/第二次的);寄件備份率(的封包/第二次的);輸出佇列長度; RCV計數器錯誤;寄件備份的計數器錯誤。

主要特點:
·驗證802.11網路的配置是正確的。
·測試的WiFi的硬體驅動程式和裝置驅動程式正在正確地運作。
·請檢查從您的當地的WiFi網路和附近的網路的信號電平。
·說明定位的干擾源,到您的網路。
·掃瞄為火熱的的斑點在您當地的區功能變數(駕駛攻擊)
·建立的信號強度一個區功能變數的地圖
·GPS用於日誌記錄和將的信號強度映射的的支援
·正確地找到您的無線公話天線(尤其是重要的,為定向天線的)。
·驗證以進行本地訪問點的的的安全性設定。
·測量的網路速度&的吞吐量和檢視可用的資料傳輸速率。
· – 說明檢查的Wifi網路的覆蓋範圍

V4.0的興建1008 26/June/2013
增加了用於最新的版本的MetaGeek無線網路連線的-間諜DBX的的支援
增加了,用於連線到隱藏的網路的當SSID被已知時的支援
,用於傳送的安全性從WirelessMon中通關密語在連線過程中在Vista/7/8,而不是要求的的視窗來顯示的關鍵的條目,在系統托盤中的對話框的上架的支援。
修正了一個的bug,是防止連線,才能存取點的當指定一個MAC位址時,
變更的的的行為在那裡,,如果一個接入點被設定為使用WEP/WEP64 WirelessMon被顯示WEP-104/WEP128。這是由於到在的的Windows Vista / 7,只有WEP金(標號任何長度的長度的)據悉,由視窗(而不是WEP金-40或WEP-104的)物質中無什麼樣的WEP金風情是在路由器中使用觀察到的行為。
現在,WirelessMon將只顯示「WEP金」除非額外的的訊息是可用的。

——————————————————————————–
【文章標題】: (監察無線WiFi軟體工具)WirelessMon 4.0.0 Build 1008
【文章作者】: 【訂單王】超級網路秒殺成交法教學密訓基地
【作者信箱】: ster168ster@gmail.com
【作者首頁】: http://por.tw/page/
【訂單王-超級網路秒殺成交法教學課程】:http://por.tw/page/new-E_learning/index.php
【基地主機】: http://goto1688.com/page/
【版權聲明】: (原創)【訂單王】超級網路秒殺成交法教學密訓基地,轉載必須保留完整標頭。刪除者依法追究!
——————————————————————————–
WirelessMon 4.0.0 Build 1008

Passmark WirelessMon is a software tool that allows users to monitor the status of wireless WiFi adapter(s) and gather information about nearby wireless access points and hot spots in real time. WirelessMon can log the information it collects into a file, while also providing comprehensive graphing of signal level and real time IP and 802.11 WiFi statistics.

The following wireless LAN information can be provided by WirelessMon (when available, as not all wireless adapters will support all of these features):
· Current connection information: SSID; Connected Access Point MAC Address; Signal strength; Tx Power; Auth type; RTS Threshold; Frag Threshold; Channel; Frequency; Number of Antennas; Beacon Period; ATIM Window; Dwell Time; Hop Pattern; Hop Set.
· Staistics information: Transmitted Fragment Count; Multicast Transmitted Frame Count; Failed Count; Retry Count; Multiple Retry Count; RTS Success Count; RTS Failure Count; ACK Failure Count; Frame Duplicate Count; Received Fragment Count; Multicast Received Frame Count; Sent OK; RCV OK; Sent Error; RCV Error; Direct Bytes Sent; Directed Frames Sent; Multicast Bytes Sent; Multicast Frames Sent; Broadcasts Bytes Sent; Broadcasts Frames Sent; Directed Bytes RCV; Directed Frames RCV; Multicast Bytes RCV; Multicast Frames RCV; Broadcasts Bytes RCV; Broadcasts Frames RCV.
· IP information: Adapter MAC Address; Adapter Name; Adapter IP Address; Subnet Mask; DHCP Enabled; Gateway Address; DHCP Server; Lease Obtained; Lease Expired; DNS Server.
· IP counter information: Band Width; Sent Rate (Bytes/Second); Data Rate (Packets/Second); RCV Rate (Packets /Second); Sent Rate (Packets/Second); Output Queue Length; RCV Counter Error; Sent Counter Error.

Key features :
· Verify 802.11 network configuration is correct.
· Test WiFi hardware and device drivers are functioning correctly.
· Check signal levels from your local WiFi network and nearby networks.
· Help locate sources of interference to your network.
· Scan for hot spots in your local area (wardriving)
· Create signal strength maps of an area
· GPS support for logging and mapping signal strength
· Correctly locate your wireless antenna (especially important for directional antennas).
· Verify the security settings for local access points.
· Measure network speed & throughput and view available data rates.
· Help check Wifi network coverage and range

V4.0 build 1008 26/June/2013
Added support for the newest version of the MetaGeek Wi-Spy DBx
Added support for connecting to hidden networks when SSID is known
Added support for sending security passphrase from WirelessMon during the connection process in Vista/7/8 rather than requiring windows to display the key entry dialog in the system tray.
Fixed a bug that was preventing connection to access points when specifying a MAC address
Changed behaviour where if an access point was set to use WEP/WEP64 WirelessMon was displaying WEP-104/WEP128. This is due to observed behaviour in Windows Vista/7 that only WEP (key of any length length) is reported by Windows (not WEP-40 or WEP-104) no matter what WEP setting is used in the router. Now WirelessMon will only display "WEP" unless extra information is available.

(監察無線WiFi軟體工具)WirelessMon 4.0.0 Build 1008 | Homepage: www.passmark.com/products/wirelessmonitor.htm

(監察無線WiFi軟體工具)WirelessMon 4.0.0 Build 1008| Size: 3.45 MB

——————————————————————————–
你在摸索訂單王-超級網路秒殺成交法(提升成交率)嗎?有【技術顧問服務】可諮詢嗎?
當問題無法解決你要發很多時間處理(或許永遠找出答案)那就是自己提升成交率技術痛苦的開始!
購買【訂單王-超級網路秒殺成交法】DVD課程,就可獲得【提升成交率】技術【顧問諮詢服務】!

About

發佈留言